Have A Barstool Racer Project we can help you, from start to finish We are a manufacture of Minibikes , Mini Drag bikes, Bar stool Racers , Go-Kart Kits and parts . All of our frame products are made in the USA in our Southern California facility . Take a look if you have any questions about our Bar Stool racers ,Minibike kits or Go karts please call us we can help you . Thanks
The Cheetah Racing Clutch is set at the factory to engage at 4000 rpm. Although many racers find this to be the optimal setting some require a lower engagement. Because of the Cheetah’s design the engagement of the clutch can be altered very quickly and easily.
There are two features of the Cheetah clutch that allow you to make engagement adjustments. The first is the cam weight design. The clutch contains six cam weights and each cam weight has a small hole in it. Weights can be added to each cam. The second feature is six springs located next to the cam weights. These springs can be adjusted to change the engagement speed.
3500 RPM Engagement Setting
By adding weights to the cams the engagement can be changed to 3500 rpm. The weights for a 3500 rpm engagement consist of six (6) #10 screws and six locking nuts. The amount of weight added is 10 grams per cam. Locking nuts must be used to ensure the weights do not come off during use.
2800 RPM Engagement Setting
To achieve an engagement of 2800 rpm include a washer with the screw and nut assembly. Washers should be placed on all six cam weights. The amount of weight added is 16 grams per cam.
2100 rpm Engagement Setting
To reduce the engagement of the clutch to 2100 rpm the weights for the 2800 rpm setting must be used and all six springs must be adjusted. Using a 3mm hex wrench turn each screw one complete turn counter clockwise. The gap should be 7.0 mm.
1800 RPM Engagment Setting
To achieve an engagement of 1800 rmp follow all the steps required to set the clutch to 2100 rpm and then turn each screw and additional ¼ turn.
PHONE HOURS MONDAY THU FRIDAY 9:AM TO 3 PM
STORE HOURS APPONTMENT ONLY
SHIPPING METHOD UPS GROUND
We have over 30 years experience in Minibikes and Barstool Racer manufacturing. Our location is in Southern California so please keep that in mind when you contact us. Our Bar stool racers , mini drag bikes and minibike kits are manufactured at time of order so please contact us for a estimated lead time Azusa minibike kits old school minibikes , micro minibike kit and parts is our business. Need help call for tec support 909-554-0054
Please note CMS (909minibike) has the right to modify, discontinue or change any specifications to any or all products in this site. Some products are shown with optional equipment installed please check with us for the up to date specifications
Contact us at firstname.lastname@example.org or 909-554-0054
ALL BARSTOOL RACERS AND MINIBIKE KITS ON THIS WEB SITE ARE FOR OFF ROAD USE ONLY AND NOT FOR STREET OR HIGHWAY USE. ALWAYS CHECK WITH YOUR LOCAL AUTHORITIES FOR LAWS PERTAINING TO THE USE OF MINI BIKES OR ANY OTHER MOTORIZED VEHICLE BEFORE RIDING . HELMET AND APPROPRIATE SAFETY WARE MUST BE WORN AT ALL TIMES . RIDERS UNDER 16 YEARS OF AGE MUST BE SUPERVISED BY AN ADULT. MOTORIZED VEHICELS CAN BE OR ARE VERY DANGEROUS AND CAN COUSE SERIOUS INJURY OR EVEN DEATH
Attention California Residents: WARNING: This store sells products that may contain chemicals which are known to the State of California to cause cancer, birth defects, or other reproductive harm. By ordering products for delivery into California, you acknowledge that you have received this warning. Please feel free to contact us should you have any questions. For more information, go to www.P65Warnings.ca.gov.